stand-off rounds

The Poly Systems ‘heavy gel' ‘Stand-off Rounds' have been developed as an alternative consumable to dearm/disrupt/demobilise and provide increased operator safety. The RAKED is positioned outside the nominal three metres IED/EOD response operator with the advantage of ‘heavy gel' entry into a variety of packaging media, including metal containers.

The 27mm cal Stand-Off Rounds (SOR) is in three length variations:
132mm
100mm
66mm
Available in 25.4mm calibre. Other calibres can be supplied.

Soft target: operational parameters minimum distance from target – 7.5 metres. Has been successfully trialled and tested at over 10 metres.

Hard target: standard steel ammunition box – minimum operational distance 2.5 metres form target. Has been successfully trialled and tested over 5 metres.

Description	Pertinent information
Stand-off Rounds (SOR) are designed to: dearm or deactivate IED or EOD in urban or difficult terrain locations (including electronic trigger devices for improvised chemical and biological devices) and large vehicle bombs discharge from standard 27mm parallel bore/nose RAKED enhance operator survival capabilities by siting the RAKED outside the 3m ‘killing zone' use the ‘heavy gel' loading to enter a range of packaging mediums including metal cases so as to instantaneously demise the firing mechanism without destructing forensic evidence; operate at a distance from the IED to preclude burning discharged explosive, gas and flame from entering and inadvertently discharging the IED/EOD offer a choice in SOR lengths of 132mm, 100mm or 66mm to meet specific target capability demands	Terrestrial use SORs are alternative RAKED consumables (to specifically enhance operator safety at ranges up to 50m) in projectile lengths of 132mm, 100mm and 66mm x 27mm. The required length SOR is loaded into a 27mm RAKED and positioned in the bore to suit the required discharge velocity. On impacting the IED/OED the SOR bursts through the surface material causing the environmentally friendly ‘heavy gel' to eject under momentum to dearm/disrupt/dismobilise the IED/OED with minimum fragmentation. SORs may be used in aircraft as a lethal projectile or for IEDD. Marine-use SORs for attached to hull, wharf or on seabed devices, for the disruption of an inbound threat (guided or non-guided) and to defeat manned or unmanned underwater covert operatives or floating mines are under development. A luminescent ‘heavy gel' is provided for night and dark area use. FOB Cost per SOR (27mm calibre): 132mm SOR AUD $65-00 100mm SOR AUD $60-00 66mm SOR AUD $55-00 Luminous heavy gel round subject to quotation at time of order. Deliverables: User manual, user training program.
Status	Company
• Certification: the ‘heavy gel' SORs have passed DSTO & RAAF trials as alternative consumables for the 27mm parallel bore RAKED with other calibres under development. • Terrestrial Capability: the 27mm SORs are suitable for providing camera access to targets through soft and hard surface materials including vehicle glazing & body panels, opening doors, trunk lids etc for IEDD operations • Photographs of Australian Police (Tasmanian Bomb Response Group) SOR trials into leather, vinyl and metal materials (render safe terrestrial IED/EOD) are available.	Team Australia - Poly Systems Pty Ltd

Description

Pertinent information

Stand-off Rounds (SOR) are designed to:

dearm or deactivate IED or EOD in urban or difficult terrain locations (including electronic trigger devices for improvised chemical and biological devices) and large vehicle bombs
discharge from standard 27mm parallel bore/nose RAKED
enhance operator survival capabilities by siting the RAKED outside the 3m ‘killing zone'
use the ‘heavy gel' loading to enter a range of packaging mediums including metal cases so as to instantaneously demise the firing mechanism without destructing forensic evidence;
operate at a distance from the IED to preclude burning discharged explosive, gas and flame from entering and inadvertently discharging the IED/EOD
offer a choice in SOR lengths of 132mm, 100mm or 66mm to meet specific target capability demands

Terrestrial use SORs are alternative RAKED consumables (to specifically enhance operator safety at ranges up to 50m) in projectile lengths of 132mm, 100mm and 66mm x 27mm. The required length SOR is loaded into a 27mm RAKED and positioned in the bore to suit the required discharge velocity. On impacting the IED/OED the SOR bursts through the surface material causing the environmentally friendly ‘heavy gel' to eject under momentum to dearm/disrupt/dismobilise the IED/OED with minimum fragmentation. SORs may be used in aircraft as a lethal projectile or for IEDD.

Marine-use SORs for attached to hull, wharf or on seabed devices, for the disruption of an inbound threat (guided or non-guided) and to defeat manned or unmanned underwater covert operatives or floating mines are under development.

A luminescent ‘heavy gel' is provided for night and dark area use.

FOB Cost per SOR (27mm calibre):

132mm SOR AUD $65-00
100mm SOR AUD $60-00
66mm SOR AUD $55-00

Luminous heavy gel round subject to quotation at time of order.
Deliverables: User manual, user training program.

Status

Company

• Certification: the ‘heavy gel' SORs have passed DSTO & RAAF trials as alternative consumables for the 27mm parallel bore RAKED with other calibres under development.
• Terrestrial Capability: the 27mm SORs are suitable for providing camera access to targets through soft and hard surface materials including vehicle glazing & body panels, opening doors, trunk lids etc for IEDD operations
• Photographs of Australian Police (Tasmanian Bomb Response Group) SOR trials into leather, vinyl and metal materials (render safe terrestrial IED/EOD) are available.

Team Australia - Poly Systems Pty Ltd