skip to navigation skip to content skip to footer

PFAS Investigation &
Management Program

Lavarack Barracks

Frequently Asked Questions


Answers to Frequently Asked Questions (FAQs) regarding the PFAS Investigation and Management Program are available below. As the investigations progress, FAQs will be added and updated.

LAVARACK BARRACKS ENVIRONMENTAL INVESTIGATION

What is the detailed environmental investigation about?

Defence is undertaking a long term detailed site investigation of Lavarack Barracks and surrounding areas to understand the extent and levels of per- and poly-fluoroalkyl substances (PFAS) including perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate (PFHxS), perfluorooctanoic acid (PFOA) on, or in the vicinity of the base. Please refer to the Summary of the Investigation page on this website for more information.

Top of section

What activities will be undertaken as part of the environmental investigation?

The detailed environmental investigation will involve:

  • desktop studies
  • targeted sampling and testing of local groundwater bores and monitoring wells on and off the base
  • monitoring, sampling and testing surface water and sediment within drainage lines
  • community water and land use surveys to inform the assessment of potential exposure risks to people
  • provision of alternative water supplies to eligible households, on request
  • ongoing liaison with relevant Federal, State and local government authorities in relation to possible health and environmental effects of these compounds
  • regular community updates through community information sessions and information on the project website.

Top of section

THE PFAS CHEMICALS

What is PFAS and what is it used for?

Per- and poly-fluoroalkyl substances (PFAS) are a group of man-made compounds that have been used for various applications around the world since the 1950’s, including Australia.

PFAS are stable chemical compounds that do not break down in the environment. They remain in the environment, on properties and in trace amounts in humans for a long time.

PFAS have typically been used to make coatings and products that resist heat, oil, stains, water and grease across Australia and around the world.

Common household products and specialty applications where PFAS may be present include: the manufacture of non-stick cookware; fabric, furniture and carpet stain protection applications; food packaging; and in some industrial processes.

Until recently, this group of chemicals was known as perfluorinated chemicals, or PFC’s. The name change to PFAS has come about to avoid confusion with another group of chemicals related to climate change, which are also known as PFC’s.

There are three PFAS chemicals of concern to Defence. These are perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA) and perfluorohexane sulfonate (PFHxS). These chemicals are the focus of the environmental investigations into PFAS on and adjacent to Defence sites.

Top of section

What is Aqueous Film Forming Foam (AFFF) and why has it been used?

Aqueous Film Forming Foam (AFFF) has been used in Australia and worldwide for many years to assist with fire training drills, emergency/disaster event training and the like, by government and private sector organsations. This includes Defence military base locations, civilian aerodromes and industrial facilities around Australia.

AFFF is the most effective fire-fighting medium for liquid fuel fires to ensure human safety in emergency situations. AFFF acts quickly to smother fuel, preventing contact with oxygen by adding a thin film of foam over the fire surface.

The detection of PFAS from the previous use of AFFF products is therefore a national and international matter that is not unique to Defence.

Top of section

What fire fighting foam does Defence now use?

From 2004, Defence commenced phasing out its use of legacy firefighting foams containing perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) as active ingredients. Defence now uses a more environmentally safe firefighting product called Ansulite. Ansulite does not contain PFOS and PFOA as active ingredients, only in trace amounts.

Ansulite is used by Defence only in emergency situations where human life is at risk, or in controlled environments to test equipment.

Top of section

How is Defence minimising the risk of contamination from the use of firefighting foams?

Any Ansulite used by Defence is captured and treated and/or disposed of at licensed waste disposal facilities in accordance with best practice regulations, and standards.

Defence-owned facilities have been upgraded where fire fighting foams are used to create closed systems. Closed systems are designed to capture spent firefighting foam and minimise the risk of firefighting foam being released into the environment.

Top of section

HEALTH

Defence cannot provide health advice as this is the role of respective State and/or local health authorities and practitioners. Defence’s position on health issues relating to PFAS aligns with the enHealth guidance statements as outlined by the Australian Government Department of Health.

Will PFAS affect my health?

Most people living in developed nations will have levels of PFAS in their body as these compounds have been used in common household and industrial applications. The most common pathway is believed to be ingestion from PFAS contaminated food and drink.

According to the Environmental Health Standing Committee (enHealth) Guidance Statements on per- and poly-fluoroalkyl substances, released in June 2016, there is currently no consistent evidence that exposure to these PFAS causes adverse human health effects.

However, because PFAS compounds persist in humans and the environment, enHealth recommends that human exposure is minimised as a precaution.

Fact sheets and further information on the affects of PFAS on your health are available on the Department of Health Website.

Top of section

Will the environmental investigation assess the ways in which humans and the environment may be exposed to PFAS?

If required, Defence will cooperate with State and Territory Governments to undertake human health and ecological risk assessments. These human health and ecological risk assessments test PFAS levels in animals and plants that are part of the human food chain, as well as some that are not.

Top of section

What is the Voluntary Blood Testing Program?

On 30 November 2016 the Australian Government commenced funding a Voluntary Blood Testing Program for residents who live close to Defence military bases at Oakey, QLD and Williamtown, NSW. This includes pre- and post-blood test counseling that informs and educates recipients on what the results may mean for them, and their families. More information on the Voluntary Blood Testing program can be found at the Australian Government Department of Health website.

Top of section

THE PFAS ENVIRONMENTAL PROGRAM

What environmental investigations are Defence undertaking?

Defence proactively initiated a program of investigations to identify the extent and levels of PFAS on, and in the vicinity of, some bases. We are working in cooperation with commonwealth, state, and local authorities as well as affected residents and property owners to carry out this important program. Verified assessment test results are made available to the affected communities, and shared with relevant state/territory, and local authorities to assist with forward planning and management as required. The investigations are undertaken within designated investigation areas, by experienced environmental service providers, in accordance with the National Environment Protection (Assessment of Site Contamination) Measure 1999 (NEPM). Environmental investigations typically include:

  • Reviewing the historical use, storage and management of fire fighting foams to identify possible contamination sources;
  • Community and stakeholder engagement information and events, including a water-use survey;
  • Sampling soil, surface water and groundwater on, and off the military base investigation area to assess potential PFAS exposure;
  • Sampling and testing of local groundwater bores and monitoring wells within and surrounding investigation areas;
  • Identifying pathways to how PFAS entered the environment and how it is passed from source to humans, animals and plants;
  • Where necessary, undertake a Human Health and Ecological Risk Assessment, which will assess risks to the population and ecology, and inform mitigating initiatives;
  • Provision of alternative water supplies, on request to eligible households; and
  • Ongoing liaison with relevant federal, state and local government authorities in relation to possible health and environmental effects from PFAS contamination.

Top of section

What screening criteria are used in Defence environmental investigations?

The Commonwealth Department of Health released the final Health Based Guidance Values (HBGV) for PFAS on 3 April 2017. These HBGV were developed by Food Standards Australia and New Zealand (FSANZ) at the request of Department of Health and replace the interim Environmental Health Standing Committee (enHealth) guidance values released in June 2016.

The HBGV for PFAS are a precautionary measure to assist people, investigating agencies and affected communities in minimising their exposure to PFAS. Specifically, these final values will be utilised by Defence to assess risk and take further action as necessary.

Current and future Defence investigations and assessments will now adopt these guidance values.

Top of section

Can I request samples of PFAS impacted soil and water to assist with research or trials?

Requests from organisations and individuals for samples of contaminated soil and water should be sent to PFAS.Coordination@Defence.gov.au for review and consideration.

Where requests for samples of contaminated soil and water are granted, the individual or organisation will be required to agree and sign-up to the Defence Deed that relates to access of PFAS contaminated materials.

Top of section

What does ‘limit of reporting’ mean?

Limit of reporting is the lowest concentration of any substance being tested that a laboratory can detect. For example, the laboratories used by Defence can detect PFOS, PFHxS, PFOA in a water sample at 0.01 micrograms per litre (μg/L) and in soil at 0. 0005 milligrams per kilogram (mg/kg).

If test results return as less than the limit of reporting this does not mean that there is no PFOS, PFOA or PFHxS, in the sample, it only means that the laboratory was not able to detect them in the sample.

Top of section

WATER

What can I do if PFOS, PFHxS or PFOA are detected in my drinking water e.g. bore or tank water?

The Environmental Health Standing Committee of the Australian Health Protection Principal Committee (enHealth) advises that there is currently no consistent evidence that exposure to PFAS causes adverse human health effects.

However, because PFAS chemicals persist in humans and the environment, enHealth recommends that human exposure to PFAS chemicals should be minimised as a precaution. Defence adopts a precautionary approach and will assess eligible household’s drinking water requirements on a case-by-case basis.

If PFOS, PFHxS or PFOA are detected in your bore or tank water and you have no alternative drinking water source, the Project team will discuss possible management strategies and alternative water supplies with you.

As a precaution, and irrespective of any actual measured concentrations in bore and/or tank water, Defence will consider supplying eligible residents, within the investigation area with an alternative water supply for drinking and domestic use.

Further information about managing tank water can be found on the Guidance on use of rain water tanks.

Top of section

Am I eligible for water assistance?

The Environmental Health Standing Committee of the Australian Health Protection Principal Committee (enHealth) advises that there is currently no consistent evidence that exposure to PFAS causes adverse human health effects.

However, because PFAS chemicals persist in humans and the environment, enHealth recommends that human exposure to PFAS chemicals should be minimised as a precaution. Defence adopts a precautionary approach and will assess eligible household’s drinking water requirements on a case-by-case basis.

Households within the investigation area, that do not have a town water connection and drink bore water (directly or via rainwater tanks), are welcome to contact the Project Team to discuss possible management strategies. These may include:

  • Supplying clean bottled water;
  • Refilling rainwater tanks with potable water; and
  • Sampling and testing domestic swimming pools that are filled and maintained with bore water.
  • Water assistance enquiries should be directed to the Project Team by phone or email. You will be asked to complete a short survey to gather information about your water use to assess your eligibility for alternative water.
If you are eligible for water assistance, Defence will arrange delivery of alternative water supplies free of charge, on a regular basis.

Top of section

How long will water assistance last?

The duration of water assistance will depend on:

  • The outcomes of Defence’s environmental investigation; and
  • each household situation related to water use and available options assessed on a case-by-case basis.
The provision of alternative water supplies by Defence will be reviewed on completion of the environmental investigation, or sooner, if information obtained during the environmental investigation suggests such a review is warranted.

The Project team will contact households directly about any proposed changes to water assistance arrangements.

Top of section

Do you test for drinking water or surface water like rivers and creeks?

During preliminary assessments of an investigation area, if drinking water (including bores and tank water) and surface water areas are deemed to be potentially contaminated with PFAS, then further investigation of these areas will occur.

Top of section

Do you test groundwater?

Where applicable, Defence assesses the hydrogeology of investigation sites to detect the presence of PFAS in the groundwater. This typically involves:

  • periodic sampling and testing of ground and surface water;
  • targeted soil and sediment sampling;
  • installation of groundwater monitoring wells to test groundwater quality and understand how groundwater moves through aquifers;
  • numerical modeling to predict future movement of PFAS in groundwater; and
  • measuring surface water flow.

Enquiries regarding waterways testing, outside of the investigation area, should be directed to your respective State Environmental Protection Authority.

Top of section

Is my water tank suitable?

Before a household can start receiving tank water, an assessment of the condition of the rainwater tank will be made by Defence. If the tank is suitable for cleaning and re-filling with potable water, Defence will arrange this. A sample of water from the point of use e.g. kitchen tap will be collected, analysed and results sent to the household.

If the tank is not suitable for cleaning and re-filling with potable water, residents may receive bottled water while the investigation is ongoing, or until a review of alternative water supply occurs.

Top of section

PROPERTY SAMPLING

Will my property (bore, pool, dam, creek, water tank) be tested?

If your property is selected for testing as part of the investigation, you will receive a letter and consent form seeking permission to sample your property. You will be requested to contact the Project team to arrange a suitable date and time.

Not every property in the investigation area needs to be tested to estimate the extent of PFAS in the investigation area.

The location of future investigation sites will be guided by the data gathered and the technical information needed to progress the investigation.

Top of section

Can I ask for my property (bore, pool, dam, creek, water tank) to be tested?

Yes, you can ask. Households should contact the Project team and complete a Water Use Survey for eligibility assessment. Priority is generally given to properties within the investigation area and where residents use bore water for drinking. A decision about whether the property will be sampled or not sampled will be provided to landholders within 7-10 days of the Water Use Survey being received.

Top of section

How are residential bores and tanks sampled?

Residential bores, extraction bores and tanks are sampled to measure water quality (with respect to PFAS) at the point it is used. The first flush sampling method is used to understand the quality of water that comes out of the bore or tank when the tap or pump is turned on.

If targeted PFAS compounds have accumulated in pipe work and are released into water during the first flush, the sample will include them.

The following steps are undertaken when using the first flush sampling method. These steps follow strict procedures, consistent with relevant Australian standards to ensure data integrity:

  • laboratory-supplied sample containers are prepared and labeled;
  • a fresh pair of nitrile gloves is used by the field staff member taking the sample;
  • a container is placed beneath a tap outlet (connected to a bore or tank) and the tap is slowly opened to collect the first draw;
  • the container is filled to the top and capped tightly;
  • the sample is immediately placed in a cooler;
  • field water quality parameters are recorded from tap water collected in a secondary container e.g. pH, temperature, dissolved oxygen, electrical conductivity and reduction/oxidation potential; and
  • general observations of water quality are recorded, including colour, turbidity and odour.

All samples are transported under industry standard chain of custody procedures to a National Association of Testing Authorities (NATA) accredited laboratory.

Top of section

How long will the sampling team need to be at my property?

The sampling team may need to be at your property for up to an hour depending on the number of samples to be collected.

In addition, the landholder or a representative may need to be present on site, during the sampling, to assist in operating the bore and with safe property access e.g. ensuring pets or livestock are secured, gates unlocked, electric fencing is turned off etc.

Top of section

How long will it take to receive my test results?

It may take up to five weeks for results to reach you.

Top of section

Will Defence test my animals or plants?

Targeted plant and animal testing will be undertaken based on the technical requirements of the investigation area and information gathered in the community land use survey.

It will not be necessary to collect samples from all plant and animal species within the investigation area.

Defence will contact landholders and residents who may be able to assist the investigation with testing. Permission will be sought before any sampling occurs at your property.

Top of section

MANAGEMENT

What is Defence doing in relation to management options?

The best management activities for investigation sites are determined by site-specific factors such as the site’s hydrogeology, the nature and extent of PFAS detections and access to the site.

The detailed site investigation assists in determining the most appropriate management strategies for a particular site.

Visit the Management Activities page for further information on what management activities Defence is currently undertaking.

Top of section

INFORMATION AND ASSISTANCE

How can I find out more and be kept informed about the environmental investigation?

Defence will regularly update the investigation site community during the investigation. Updates will be delivered through community information sessions, advice from the Project team, factsheets and the website, including these FAQs.

For more information please contact the Defence environmental investigation Project team.

Top of section

I am considering requesting compensation. How do I do this?

Individual claims for compensation will be considered on a case by case basis. How to make a claim is outlined on the PFAS financial claims page.

Note that Defence cannot advise landholders, property owners and residents about legal representation or conditions offered by legal representatives.

Top of section